抗菌防黴整理劑

HOLPOSON® Captain AM

HOLPOSON® Captain AM 是一種具有抗菌、防黴和防螨多重作用的抗菌防黴整理劑，适用于大多數的紡織纖維，如：棉、毛、滌棉、錦綸、腈綸、粘膠、滌綸等天然、合成纖維及混紡織物。即可應用在針織物、梭織物、運動裝、工作服、無菌行業服裝 、家紡産品、裝飾用布等紡織品。

一、物化性能

外 觀：乳白色至微黃的分散液

離 子 型：弱陰離子

主要成份：有機季铵鹽

溶 解 性：分散溶于水

二、使用方法

首先稱取抗菌防黴劑HOLPOSON® Captain AM，攪拌同時加水，然後稀釋到所需要的濃度，按照如下工藝進行生産：

1．浸軋法

HOLPOSON® Captain AM 15-20g/L

交聯劑HOLPOSON®HFM 10g/L

柔軟劑HOLPOSON®SOFT 5g/L

軋液率 60-70%

工藝：110℃烘幹 然後150℃定型 60~90秒

2. 浸漬法

HOLPOSON® Captain AM 1-2%

交聯劑HOLPOSON®HFM 1%

工藝：浴比 1:10

處理條件：20℃浸漬處理20~ 30分鐘，脫水（帶液率60~100%），烘幹。

3. 噴灑法

配成50~60g/L(根據實際情況配置相應要求的濃度)的溶液， 噴灑在需處理的産品表面， 自然晾曬或烘幹。

注意事項

1.化料時用冷水或溫水（約30 ~40℃），可保證産品良好的加工穩定性和抗菌效果.

2.但如果使用一部分助劑如纖維消光劑，整理效果會有所下降；或織物的組織結構過于疏松對抗菌檢測也有影響。

3.為了整理效果，我們建議預先試驗。整理效果主要取決于織物類型。

貯 存

存放在陰涼幹燥通風的地方，該産品的貯存期限至少為1年。開封後盡快用完。如果沒有用完，請蓋緊防止産品受潮或混入異物。

Antibacterial and Mildew-Proof Finishing Agent

HOLPOSON® Captain AM

HOLPOSON® Captain AM is an anti-bacterial, mildew-proof and anti-mite finishing agent with multiple functions. It is suitable for the majority of textile fibers, such as: cotton, wool, polyester-cotton, nylon, acrylic, viscose, polyester.etc and blended fabrics. So it can be used in knitted fabrics, woven fabrics, sportswear, work clothes, aseptic industry clothing, home textile products, decorative fabrics and other textiles.

Physical & chemical properties:

Appearance: Milky white to yellowish dispersion liquid

Ionicity: Weak anionic

Main contents: Organic quaternary ammonium salt

Solubility: Dispersable and soluble in water

Usage:

First, weigh and take the HOLPOSON® Captain AM, stir it while adding water, then dilute it to the required concentration, and carry out the production according to the following process:

1. Padding method

HOLPOSON®Captain AM: 15-20g/L

Crosslinker HOLPOSON®HFM: 10g/L

Softener HOLPOSON®SOFT: 5g/L

Liquid retention rate: 60-70%

Process: Drying at 110 ℃ and heat setting at 150 ℃ for 60-90 seconds

2. Impregnation method

HOLPOSON®Captain AM: 1-2%

Crosslinker HOLPOSON® HFM: 1%

Process: Bath ratio: 1:10

Treatment condition: Impregnation at 20 ℃ for 20-30 minutes, dehydration (with liquid rate of 60-100%), drying.

3. Spraying method

Prepare a solution of 50-60g/L (prepare the required concentration according to the actual situation), spray it on the surface of the material to be treated, and dry it naturally or dry it with heat.

Attentions:

1. Dissolving the product with cold water or warm water (about 30 ~ 40 ℃) can ensure good processing stability and antibacterial effect of the product

2. If some auxiliaries such as fiber matting agent are used, the finishing effect will be reduced. Or if the structure of the fabric is too loose, the antibacterial test result will also be affected.

3. In order to guarantee the overall the effect, we suggest to test in advance. The overall effect mainly depends on the fabric type.

Storage:

Store in a cool, dry and ventilated place. The storage time is 1 year minimum. Use up as soon as possible after opening. If it is not used up, please cover it tightly to prevent the product from moisture or foreign matters.

更多精彩资讯请关注tft每日頭條，我们将持续为您更新最新资讯!