flexsim中導入AutoCAD圖形（二）

上次為大家介紹了關于導入CAD圖形的前期操作，接下來就為大家繼續介紹如何導進Flexsim中。

Last time, I introduced the preliminary operation of importing CAD graphics for you. Next, I will introduce how to import into Flexsim.

首先，在工具箱闆塊中，點擊加号選擇可視化設置，選擇模型背景。

First, in the Toolbox pane, click the plus sign to choose Visualization Settings, and choose Model Background.

選擇文件後，會出現坐标位置選擇，有的時候會自動出現對應的坐标初始位置，這是跟flexsim中心相對應的，當然你也可以設置初始位置為（0，0，0），本案例就選擇提供坐标了。

After selecting the file, the coordinate position selection will appear, and sometimes the corresponding initial position of the coordinates will automatically appear, which corresponds to the center of flexsim. Of course, you can also set the initial position to (0, 0, 0), this case is Choose to provide coordinates too.

還可以設置導入後文件的顔色設置，可以自己更改使其在Flexsim中顯示更加突出

You can also set the color settings of the imported file, you can change it yourself to make it more prominent in flexsim

還可以選擇吸附到網絡

You can also choose to snap to the network

那麼這樣我們就得到了導入之後的模型背景。我們會發現其中心與模型中心幾乎對應。

Then we get the model background after importing. We will find that its center almost corresponds to the model center.

以上就是向Flexsim中導入AutoCAD圖形的全部過程。

The above is the whole process of importing AutoCAD drawings into Flexsim.

但是在導入的時候經常會出現一些故障，那麼接下來就為大家介紹一下常見問題的解決方法。

However, there are often some failures when importing, so the following will introduce the solutions to common problems for you.

1、AutoCAD圖形不可見

AutoCAD graphics are not visible

要解決此問題，需确保

To resolve this issue, make sure

①在背景的“屬性”窗口的“圖層”選項卡中，确保将“可見性”按鈕設置為顯示圖形中的每個圖層。

In the Layers tab of the Properties window for the background, make sure the Visibility button is set to show every layer in the drawing.

在後台的屬性窗口的背景選項卡上，确保發光框被選中。

On the Background tab of the Properties window in the background, make sure the Glow box is checked.

②第二個原因可能是因為CAD文件的原點與實際圖形也就是flexsim中心點相距甚遠，這個可以通過縮放Flexsim視野找到圖形，并根據之前設置的坐标進行調整。

The second reason may be because the origin of the CAD file is far away from the actual graphic, that is, the center point of flexsim. This can be found by zooming the Flexsim field of view and adjust it according to the previously set coordinates.

③還需要保證flexsim的全局設置中的顯卡設置不是現代模式，而是前面的兩種模式之一。

It is also necessary to ensure that the graphics card setting in the global settings of flexsim is not the modern mode, but one of the previous two modes.

2、沒有出現參考其他文件的AutoCAD文件

There is no AutoCAD file that references other files

一些AutoCAD文件包含對其他AutoCAD圖形的引用，因此需要确保所引用的文件與AutoCAD文件包含在同一個文件夾中。

Some AutoCAD files contain references to other AutoCAD drawings, so you need to make sure the referenced files are contained in the same folder as the AutoCAD files.

參考資料：《Flexsim中文用戶手冊》

哔哩哔哩，輪回Lumir，《幹貨小技巧04——CAD圖紙導入全流程講解》

本文由LearningYard新學院原創，若有侵權，請聯系删除。

更多精彩资讯请关注tft每日頭條，我们将持续为您更新最新资讯!