佳能打印機不能打印總報5b00?佳能噴墨打印機報錯代碼5B00 / 5B01 / 5B02 / 5B03 / 5B04 / 5B05 / 5B10 / 5B11 / 5B12 / 5B13 / 5B14 / 5B15，現在小編就來說說關于佳能打印機不能打印總報5b00?下面内容希望能幫助到你，我們來一起看看吧!

佳能打印機不能打印總報5b00

佳能噴墨打印機報錯代碼5B00 / 5B01 / 5B02 / 5B03 / 5B04 / 5B05 / 5B10 / 5B11 / 5B12 / 5B13 / 5B14 / 5B15

5B00黑色打印頭計數器已達到标準值

5B01 藍色打印頭計數器已達到标準值

5B02 紅色打印頭計數器已達到标準值

5B03 黃色打印頭計數器已達到标準值

……….

佳能5b00代碼提示

拆下主闆上eeprom芯片,重置數據

打印機上EEPROM芯片位置

恢複eeprom數據後安裝

error code 5B00 in the Canon g2000, g3000, g2002, and g2010 printer. You can solve this error code by using the following methods. You need the Canon service tool V4905 or V5302(清零軟件版本号) for solving this error.

The printer begins to blink orange and green light alternatively for 7 to 8 times when you try to print or scan

First of all, check your ink levels. Your cartridges should be half-filled to reset this error. If your ink is empty, refill it and continue the process

Hold the power button and press and release the ‘stop' button for 5 times. Then release the power button. wait till the green light is stable. Now your printer is in service mode.

下面介紹一種不用清零軟件複位方法

同樣要進入維修模式同時按電源鍵和停止鍵開機，然後不放電源鍵按5次停止鍵,手松開,進入到維修模式,電源燈常亮

紙盒裡放入張紙，然後按5次停止鍵1次電源鍵，此時會打印1張清零成功的紙張,之後再按3次停止鍵1次電源鍵，然後會再打印一張紙，然後重啟就可以了.

更多精彩资讯请关注tft每日頭條，我们将持续为您更新最新资讯!